Installing special vehicle multifunction control module (SVMCM) - AN82.25-P-1000-03M

Model 220 

1. Remove the two sheet metal screws (17) for the bumper mount in the right trunk side wall.
2. Screw mount (16) onto bumper mount with sheet metal screws (17), washers (18) and sealing washers (19).
3. Fasten special vehicle multifunction control module (SVMCM) (N26/9) to mount (16) with conventional M6 collar nut (20) and connect.
   Fig 1: Identifying Special Vehicle Multifunction Control Module, Sheet Metal Screws And Collar Nut