LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2006 >> S430 Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission -- Testing & Repair -- 215 & 220 Chassis >> Testing & Repair >> Remove/install transmission with torque converter - AR27.10-P-0500 >> Remove/install transmission with torque converter - AR27.10-P-0500I >> Disconnecting and connecting plug connector - AR27.10-P-0500-01A

Disconnecting and connecting plug connector - AR27.10-P-0500-01A

HOUSING

Number Designation Transmission 722.6 except 722.660/661/662/663/666/674
BA27.40-P-1014-01A Bolt, heat shield to transmission housing Nm 6
  1. Unscrew bolt (62a) TORQUE SPECIFICATION .
  2. Undo bolt (62b) TORQUE SPECIFICATION
  3. Remove heat shield (62)

    IMPORTANT Heat shield (62) not installed on model 463.

    Fig 1: Identifying Heat Shield And Bolts
    G04715339Courtesy of MERCEDES-BENZ USA
  4. Turn bayonet fitting of pilot bushing (21) 90° to the left and detach electrical connector (26).

    IMPORTANT Replace O-ring of electrical connector (26).

  5. Install in the reverse order.
    Fig 2: Identifying Pilot Bushing And Electrical Connector
    G04715340Courtesy of MERCEDES-BENZ USA
scientia non olet · About LEMON Manuals