LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2006 >> S430 Base >> Repair and Diagnosis >> Suspension >> Front Suspension >> Suspension - 215 & 220 Chassis >> Removal & Installation >> Flushing active body control (ABC) system - SM32.50-P-0002A >> Checking active body control system (ABC) for proper function - SM32.50-P-0002-02A

Checking active body control system (ABC) for proper function - SM32.50-P-0002-02A

  1. Start vehicle
  2. Allow vehicle to run for 10 minutes with DAS function "Rodeo".

    IMPORTANT Vehicle at normal level

  3. Lift level to stage 2 by actuating level switch.

    IMPORTANT Both LED's in the level switch come on.

  4. Allow vehicle to idle for 15 minutes in level stage 2

    IMPORTANT Do not move vehicle and do not change level.

  5. Lower level to normal position by actuating level switch.

    IMPORTANT Do not enter the vehicle, otherwise the control valves actuate immediately.

    Both LED's in the level switch go out.

    IMPORTANT Evaluation:

    Visual check with 2nd employee standing outside.

    The level control should start immediately and the vehicle should lower uniformly.

    (A delay of max. 1 s between left/right and front/rear is no reason for complaint).

    IMPORTANT Vehicle not okay: ↓

  6. Allow vehicle to stand over night.

    IMPORTANT At least 12 hours.

  7. Check again.

    IMPORTANT Without "Rodeo", start with step  3.

    IMPORTANT Vehicle not okay: ↓

  8. Reflush ABC system.

    IMPORTANT Information to:

    GSP/SPP

    Tel.: +49 (0) 711-17-63867