Removing, installing side airbag unit in the rear - AR91.60-P-0694N
MODEL 215
| Removing, installing | |||
| Risk of injury when carrying out test or repair work on airbag or emergency tensioning retractor units | Store airbag unit with expulsion area on top, do not subject to temperatures above 100 °C. Interrupt power supply when working on such units | AS91.00-Z-0001-01A | |
| Important instructions for performing repair, body work and welding on vehicles with airbags and emergency tensioning retractors | AH91.00-P-0002-01M | ||
| Evaluation of airbag and emergency tensioning retractor units in vehicles involved in an accident | AH91.00-P-0006-01B | ||
| Legal regulations concerning the handling and storage of airbag and emergency belt tensioner units | AH91.00-P-0004-01A | ||
| 1 | Withdraw ignition key | ||
| 2 | Remove rear seat backrest | AR91.12-P-1620MA | |
| 3 | Remove side wall paneling | AR68.30-P-1450N | |
| 4 | Disconnect connector from left/right side airbag squib (R12/11 and. R12/12) | ||
| 5 | Unscrew nuts (1) from retaining plate of side airbag unit (2) | ||
| 6 | Remove side airbag unit | ||
| Notes on disposal of airbag and emergency tensioning retractors | OS91.00-P-0001-01A | ||
| 7 | Make airbag units unusable | AR91.60-P-0611A | |
| 8 | Install in the reverse order | ||
| 9 | Carry out diagnosis. | Refer to: ↓ STAR DIAGNOSIS |