Removing and installing window airbag - AR91.60-P-0693M
MODEL 215, 220
Illustrated on model 220
| Removal, installation | |||
| Injury hazard when testing or repairing airbags or emergency tensioning retractors | Store airbags with opening surface pointing up, do not expose to temperatures above 100 °C. Interrupt electric circuit when working on these units | AS91.00-Z-0001-01A | |
| Important instructions for performing repair, body work and welding on vehicles with airbags and emergency tensioning retractors | AH91.00-P-0002-01M | ||
| Evaluation of airbags and emergency tensioning retractors on accident vehicles | AH91.00-P-0006-01B | ||
| Legal regulations on handling and storing airbags and emergency tensioning retractors | AH91.00-P-0004-01A | ||
| 1 | Remove ignition key | ||
| 2 | Remove roof paneling | Model 215 | AR68.30-P-4300N |
| Model 220 | AR68.30-P-4300M | ||
| 3 | Unscrew nuts (2) (8 each) from window airbag (1) | Figure | |
| *BA91.60-P-1005-01A | |||
| 4 | Disconnect connector from left and right window airbag squibs (R12/16 and R12/17) | ||
| Instructions on disposal of airbags and emergency tensioning retractors | OS91.00-P-0001-01A | ||
| Rendering airbags unusable | AR91.60-P-0611A | ||
| 5 | Remove window airbag (1) | ||
| 6 | Install in opposite order | ||
| 7 | Perform diagnosis |
| Number | Designation | Model 215 | Model 220 | |
|---|---|---|---|---|
| BA91.60-P-1005-01A | Nut for window airbag on roof frame | Nm | 5 | 5 |