Remove/install blower regulator for seat ventilation motors in rear seat - AR91.30-P-1920M
MODELS 220.0 /1 with CODE (224c) Electrically adjustable rear single seats, with seat ventilation, seat heater and memory package with CODE (402a) Seat ventilation of rear seats
Fig 1: Identifying Blower Regulator For Seat Ventilation Motors In Rear Seat Remove/Install Components - Models 220.0 /1
| Remove/install | |||
| 1 | Remove rear seat backrest | With electrically adjustable rear bench seat, code 223b. | AR91.12-P-1620M |
| With rear single seats, electrically adjustable, with seat ventilation, seat heater and memory package, code 224c. | AR91.12-P-1620MB | ||
| 2 | Place rear seat backrest (1) onto suitable clean surface with backrest upholstery (3) facing downwards. | ||
| 3 | Pull backrest upholstery (3) out of clip groove (see arrows) in backrest frame (2) | ||
| 4 | Unscrew bolt (4) and remove left (N29/3) and right (N29/4) rear seat ventilator blower regulator | ||
| 5 | Disconnect connector (6) from left (N29/3) and right (N29/4) rear seat ventilators | ||
| 6 | Install in the reverse order | ||
| 7 | Perform seat ventilation function test |