Correcting oil level in air conditioning after system suddenly loses all refrigerant - AR83.30-P-5253E
MODEL 163 with CODE (580) Air conditioning or Tempmatic for USA A/C compressor 7SB16
MODEL 202 with CODE (580) Air conditioning or Tempmatic for USA with CODE (581a) Air conditioning (Automatic) A/C compressor ND6CA17, A/C compressor 7SB16
MODEL 208 with CODE (580) Air conditioning or Tempmatic for USA with CODE (581a) Air conditioning (Automatic) A/C compressor 7SB16
MODEL 210 with CODE (580) Air conditioning or Tempmatic for USA with CODE (581a) Air conditioning (Automatic) A/C compressor 7SB16
MODELS 215, 220 A/C compressor 7SE16
| Correct oil level | |||
|---|---|---|---|
| Carry out work quickly, compressor oil is hygroscopic When evacuating refrigerant, the quantity of compressor oil evacuated must be added again to refrigerant circuit when refilling air conditioning (new oil) |
|||
| 1 | Replace defective component and fluid reservoir | Models 202, 208, 210 | AR83.30-P-6520E |
| Model 163 | AR83.30-P-6520GH | ||
| Model 215, 220 | AR83.30-P-6520M | ||
| 2 | Additionally fill new compressor oil to specified oil capacity | *BF83.55-P-1002-01A |
A/C COMPRESSOR
| Number | Designation | A/C compressor 7SB16 Refrigerant R134a in model 163 | A/C compressor 7SB16 in models 140, 170, 202, 208, 210 | A/C compressor ND6CA17 in model 202 | ||
|---|---|---|---|---|---|---|
| F83.55-P-1002-01A | Additional oil capacity after sudden emptying of system (e.g. ruptured line) | Compressor oil | cm3 | 40 | 40 | 40 |
| Specifications for service products | Sheet | BB00.40-P-0362-00A | BB00.40-P-0362-00A | BB00.40-P-0362-00A | ||
A/C COMPRESSOR
| Number | Designation | A/C compressor 7SE16 in model 215 | A/C compressor 7SE16 in model 220 | ||
|---|---|---|---|---|---|
| BF83.55-P-1002-01A | Additional oil capacity after sudden emptying of system (e.g. ruptured line) | Compressor oil | cm3 | 50 | 50 |
| Specifications for service products | Sheet | BB00.40-P-0362-00A | BB00.40-P-0362-00A | ||