Removing and installing camshaft Hall sensor - AR15.10-P-2000L

ENGINE 137.970 in MODEL 215.378, 220.178 

Shown on engine 137 in model 215 

Fig 1: Identifying Camshaft Hall Sensor - Shown On Engine 137 In Model 215

	Removing, installing
1	Remove air cleaner		AR09.10-P-1050L
2	Remove intake manifold	Suspend intake manifold complete with inlet connection, intake air pipes and fuel rail at hood. The intake manifold must not be disassembled.	AR09.20-P-1310L
3	Unplug connector (arrow) of electrical connection of left camshaft Hall sensor (B6/2) and right camshaft Hall sensor (B6/3)
4	Remove camshaft Hall sensors (B6/2, B6/3)		*BA15.10-P-1002-03B
5	Install in the reverse order

POSITION SENSOR