Remove/install camshaft Hall sensor - AR15.10-P-2000M
ENGINE 275 in MODEL 215, 216, 220, 221, 230
Illustrated on model 220
| Remove/install | |||
| Risk of injury caused by fingers being pinched or crushed when removing, installing or aligning hoods, doors, trunk lids, tailgates or sliding roof. | Keep body parts and limbs well clear of moving parts. | AS00.00-Z-0011-01A | |
| 1 | Remove right charge air cooler (1) from engine and connect with connected coolant hoses to the engine hood | AR09.41-P-6817HH | |
| 2 | Pull out the plug (arrow) | ||
| 3 | Remove camshaft Hall sensor, left cylinder bank (B6/2) and camshaft Hall sensor, right cylinder bank (B6/3) | ||
| *BA15.10-P-1002-03D | |||
| 4 | Install in the reverse order | ||
| Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running | Secure vehicle to prevent it from moving by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. |
AS00.00-Z-0005-01A | |
| 5 | Run engine and inspect for oil leaks | ||
| 6 | Read out fault memory and erase if required | *WH58.30-Z-1048-13A | |
| Connect STAR DIAGNOSIS and read out fault memory | AD00.00-P-2000-04A |
| Number | Designation | Engine 271, 275, 285 | |
|---|---|---|---|
| BA15.10-P-1002-03D | Camshaft position sensor to cylinder head cover | Nm | 8 |
COMMERCIALLY AVAILABLE TOOLS
| Number | Designation | |
|---|---|---|
| WH58.30-Z-1048-13A | STAR DIAGNOSIS diagnosis system, Compact Passenger Car | 6511 1801 00 |