Notes on installing camshaft bearing bridge - AH05.20-P-2000-01BV
Engine 113.960 with CODE (479) Cylinder shutoff
Pay attention to the following notes before installing the camshaft bearing bridges:
- Oil camshaft bearings.
- For tolerance reasons, camshafts must not be replaced individually.
- If the camshaft bearing bridge is damaged, replace the complete cylinder head together with the camshaft bearing bridge.
- The M 7x84, 7x90 and 7x120 bolts must always be replaced.
- It is not permitted to re-use the M 7x84, 7x90 and 7x120 bolts.
- Pay attention to tightening torque, slackening diagram and tightening diagram of the bolts.