PIN check with TELE AID emergency call, function - GF82.95-P-3002A

MODEL 129, 202, 208.3, 210 as of 1.6.98, 215, 220 with CODE (347) TELE AID emergency call system (D2B) 

MODEL 140, 210 up to 31.5.98 with CODE (348) TELE AID emergency call system 

MODEL 140, 202, 210, 220 with CODE (930) Taxi emergency call 

The abbreviation for PIN stands for P  ersonal I  dentification N  umber. The PIN is a 4-digit code serving as pass word for making calls with the telephone system. It should be entered by the user after switching on the telephone system (with D1-network entering is optional).

Since the PIN cannot be entered manually in the event of a TELE AID emergency call (or taxi emergency call) special prerequisites are provided:

The user can store the PIN number in the emergency call system control module (TELE AID, A35/8)  via the CTEL handset (A34).Then TELE AID can automatically transmit the PIN to the CTEL transmitter and receiver (A35)  in the event of an emergency call.

It is always possible to change the PIN with the CTEL handset (A34)  or erase it in the EPROM of the emergency call system control module (TELE AID, A35/8)  .

Always  observe that no  TELE AID emergency call is transmitted when the PIN is erased or not stored. The indicator lamp in the TELE AID emergency call pushbutton switch (S93/3)  comes on as a signal.