Remove/install fixed window in rear door - AR72.12-P-1970M

MODEL 220 

Fig 1: Identifying Rear Door Fixed Window Remove/Install Components

	Remove, Install
1	Remove door liner from rear door		AR72.12-P-1010M
2	Remove insulating mat from inner door panel	Installation:  Before installing insulating mat, check crank window for easy motion Replace damaged insulating mat
3	Remove inner sealing rail		AR72.10-P-1600E
4	Remove trim strip with outer sealing rail		AR72.10-P-1700E
5	Remove crank window in rear door	Do not remove crank window, position in door	AR72.12-P-1910M
6	Remove window guide rail from window stay (1)	Installation:  Coat window guide rail with soap solution.
7	Unscrew screws (2 and 3)
8	Remove window web (1)	Avoid damaging paint
9	Pull fixed window (4) out toward front together with rubber frame (5)	Before installing coat rubber frame (5) with soap solution
10	Install in the reverse order