Remove/install freewheeling device - AR00.60-P-1500A

MODEL 164, 221, 251 

Fig 1: Identifying Freewheeling Device Components

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

	Installing, removing
	WARNING: Before mounting the freewheeling device (2) make sure that the vehicle is at a ready to drive level, to avoid any damage to the body. On all vehicles the freewheeling device (2) may only be mounted on the rear axle, to avoid damage to the freewheeling device (2) and the body caused by turning in the steering wheel. When the freewheeling device (2) is mounted the vehicle may only be maneuvered manually (at max. 5 km/h or 3 mph), it is not permitted to drive or tow the vehicle
	The parking brake must be engaged to secure the vehicle against moving off on its own
1	Raise vehicle at rear
2	Remove rear wheel (3)
	Take off/fit on wheel	Model 164	AP40.10-P-4050Z
		Model 221	AP40.10-P-4050SX
		Model 251	AP40.10-P-4050RT
3	Mount freewheeling device (2) to wheel hub (1)		Fig 2
		Model 164, 251	*BA40.10-P-1002-01J
		Model 221	-
4	Mount wheel (3) to freewheeling device (2)	Model 164, 251	*BA40.10-P-1003-01J
		Model 221	-
5	Remove in the reverse order

WHEELS

Number	Designation		Model 164
BA40.10-P-1002-01J	Wheel freewheel to wheel hub	Nm	80
BA40.10-P-1003-01J	Wheel to wheel freewheel	Nm	80

Fig 2: Identifying Freewheeling Device (164 589 03 63 00)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.