Heat exchanger, location - GF83.70-P-4001-01A
Model 210 with stationary heater/ model 210 up to 31.08.96 with engine 602.982 with heater booster/model 463 as of 01.06.94 with stationary heater
The heat exchanger (1) is an integral part of the heater.
If forms one inseparable unit with the stationary heater/heater booster control module (A6n1).
The control module/heat exchanger unit is bolted to the burner housing (2).
The figure shows the stationary heater. The heater booster in model 210 up to 31 August 96 with engine 602.982 is identical in terms of design, however, did not have its own coolant circulation pump.