Combustion air blower, location - GF83.70-P-4004-01A
Model 210 with stationary heater/ model 210 up to 31.08.96 with engine 602.982 with heater booster/model 463 as of 01.06.94 with stationary heater
The combustion air blower (A6m2) is a component of the heater. It forms one unit together with the combustion air housing (1).
The combustion air blower is bolted to the burner housing (3).
In addition to the combustion air the fuel for combustion is also fed in through the combustion air housing. The fuel is fed in through the fuel inlet (2).
The combustion air housing contains a silencer for the combustion air and a damper for the fuel.
The figure shows the stationary heater. The heater booster in model 210 up to 31 August 96 with engine 602.982 is identical in terms of design, however, did not have its own coolant circulation pump.