Commissioning/base setting function - GF82.61-P-2000J

MODEL 463 with CODE (ET6) Auto pilot system (APS4) 

Commissioning 

After a new APS navigation processor (A2/30)  has been installed, the system has to be coded. Coding is carried out with the Hand-Held Tester (HHT). When commissioning, the following base settings  have to be carried out.

Version coding vehicle data 

• Vehicle model
• Condition of tires (new or used tires)

  Version coding components 

• CD changer
• Bose Sound System

Position 

The position is entered at the APS radio and navigation operating unit (A2/29)  or automatically by GPS positioning (takes 2 up to a max. of 20 minutes).

The APS cannot be used until commissioning has been completed. 

For further information on this system see: 

→ APS Operating Instructions

→ The auto pilot system of the new generation (product update publication)