Burner housing, location - GF83.70-P-4000-01A
Model 210 with stationary heater
Model 210 up to 31.08.96 with heater booster
Model 463 as of 01.06.94 with stationary heater
The burner housing (3) is an integral part of the heater.
It is located between the combustion air blower (1) and the control module/heat exchanger unit (2).
The figure shows the stationary heater. The heater booster in model 210 up to 31 August 96 with engine 602.982 is identical in terms of design, however, did not have its own coolant circulation pump.