Shift lock override, function - GF27.10-P-3023T
TRANSMISSION 722.6 in MODEL 211, 219
Shows model 211
Function
Should it not be possible to engage drive position from selector lever position "P" due to electrical, electronic or mechanical faults, then the locking of selector lever position "P" can be unclocked with the Shift-Lock-Override function. For this purpose the stowage compartment in the center console must be unclipped and pressure is applied to the lever (2) through the guide underneath using a suitable tool (1) (arrow).
The selector lever position "P" lock is released via a bolt in the lock solenoid valve. The selector lever can be moved from position "P" by simultaneously operating the lock lever.
| R/P lock, location/task/design/function | GF27.60-P-5103P | ||
| Parking lock, location / task / design / function | GF27.10-P-5100GA |