Retrofit iPod wiring harness - AZ82.60-P-0001-02TTR

Fig 1: Identifying Ipod Wiring Harness Components

Fig 2: Identifying Interface Coupling, Grommet, Ipod Wiring Harness And Connector

Drill hole with ø (C) in glove compartment according to dimensions.
Ensure that no other components are damaged when drilling the hole with Ø (C).
Route interface coupling (5) of iPod wiring harness (4) into the front passenger footwell through hole with ø (C) and close hole with grommet (6).
Interface coupling (5) of iPod wiring harness (4) will be connected to the iPod interface at a later point in time. iPod wiring harness connector (23) will be connected to the iPod at a later point in time.