Check condition of air springs - AR32.22-P-1500-05TA
To ensure that the air suspension continues to provide satisfactory performance it is important to inspect the suspension elements for damage prior to installation.
Air spring removed:
The air spring must meet the following conditions:
- The air spring must be straight.
- The air spring must not be buckled or twisted.
- The protective boot (1) must not be damaged (e.g. cracks).
- The folds in the protective boot (1) must be correctly formed.
- The length of the air spring must not exceed the dimension (b) of approx. ≈300 mm from the center of the eye to the upper contact surface.
Too long or unrolled air springs are rejects and should not be installed in the vehicle !