Removing rear head restraint - AR91.16-P-1770T

MODEL 211.0 except CODE (287a) Through-loading feature 

Fig 1: Identifying Head Restraints, Orifices, Release Lever, Head Restraint Mechanism

	Remove
1	Put up relevant head restraint (1) manually
2	Unclip orifices (2) from rear shelf (3)	Note correct installation positions.
3	Operate release levers (4) at both sides with punch Ø 8 mm (6)
4	Pull head restraint (1) out of head restraint mechanism (5)
	Install
5	Insert head restraint (1) into head restraint mechanism (5) until head restraint (1) engages
6	Install orifices(2)	Note correct installation positions.
7	Perform function check of head restraint tilting	See Operating Instructions