Clicking noise from engine area - AF00.00-P-1900AG

MODEL 211.070 #A up to 137200 with ENGINE 113.967

OPERATION NO. OF OPERATION TEXTS OR STANDARD TEXTS AND FLAT RATES

Category	Op. no.	Operation text	Time	Acc. no.	Code
P	221260	Replace (both) front mounts for engine suspension	026 WU	-	-

Damage code	Cause	Remedy
24 005 36 Text in message field: "Noise transmission via engine mount"	Noise (clicking) between 1200...2000 rpm with engine cold and warm, best audible under light load.	In order to avoid erroneous removal: ↓
		1 Listen to engine from beneath. Noise should be clearly audible from area of oil pan near oil pump.
		2 Remove/install/replace both engine mounts If noise is not eliminated, contact service department for your market.	AR22.10-P-1100PV

PARTS ORDERING NOTES

Part no.	Designation	Quantity
220 240 27 17	Engine mount	2