Connecting rear propeller shaft to rear axle center assembly - AR41.10-P-0050-04I

DRIVESHAFT

Number	Designation			Model 211	Model 215	Model 220	Model 230
BA41.10-P-1002-01A	Self-locking nut, flexible coupling to rear propeller shaft or rear axle center assembly.	M10	Nm	40	-	-	-
BA41.10-P-1002-01A		M12	Nm	60	60	60	60

Models 211/215/230 without vibration damper

Replace self-locking nuts (26).

Mount rear propeller shaft on rear axle center assembly

Fig 1: Identifying Rear Propeller Shaft To Rear Axle Center Assembly Bolt (Models 211/215/230 Without Vibration Damper)

Models 211, 220.028/128 with vibration damper

Shown on model 220.028

Fig 2: Identifying Rear Propeller Shaft To Rear Axle Center Assembly Bolt (Shown On Model 220.028)