Vibration in rear area while driving even when brake is not actuated - AF42.20-P-3101AV

MODEL 211 

OPERATION NO. OF OPERATION TEXTS OR STANDARD TEXTS AND FLAT RATES

Category	Op. no.	Operation text	Time	Acc. no.	Code
P	401590	Remove/install wheels (2)	004 WU
P	422851	Remove/install rear brake pads, replace according to condition (wheels removed)	011 WU
P	423301	Remove/install parking brake shoes, replace according to condition (brake pads removed)	021 WU	-	-

Damage code	Cause	Remedy
42 341 93	The basic setting for the parking brake may be adjusted too tightly.	1 Check parking brake linings.
	Due to heat formation in the service brake, the parking brake can extend and make contact with the parking brake linings, thereby causing vibration.	Brake linings not okay: ↓
		2 Remove/install/replace parking shoes of parking brake. Always use springs enclosed with replacement parking brake lining. Ensure that reinforced spring (thicker wire) is used on the expanding lock. If it is not enclosed with the replacement parking brake lining, order separately (see parts ordering notes)	AR42.20-P-0530T
		3 Adjust parking brake. Clearance for parking brake shoes is 11-12 teeth for this model series (basic setting)	AR42.20-P-0540T

PARTS ORDERING NOTES

Part no.	Designation	Quantity
171 423 00 92	Spring	2
230 420 03 20	Replacement brake lining	1