Remove/install cover on instrument cluster - AR68.10-P-1550TX

MODEL 219.3 

Fig 1: Identifying Cover On Instrument Cluster Remove/Install Components

Courtesy of MERCEDES-BENZ USA

	Remove/Install
1	Move steering wheel as far back and low as possible	See Operating Instructions
2	Insert your fingers into gap (arrows between cover (1) and instrument cluster (A1), and pull cover (1) towards rear until it disengages from lower catch hooks (2)	Carefully unclip cover (1), otherwise the bottom catch hook (2) can break
3	Unclip cover (1) from upper catch hooks (3) by hand and pull out of instrument panel toward rear	Carefully unclip cover (1), otherwise the upper catch hook (3) can break.
4	Install in the reverse order