LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2006 >> CLK55 >> Repair and Diagnosis >> External Pages >> Different car >> Section 317 (Electrical System, Equipment & Instructions -- CLK350 Coupe (209.356)) >> Testing & Repair >> Remove/install 12 Volt socket - AR54.10-P-1000TX

Remove/install 12 Volt socket - AR54.10-P-1000TX

WARNING: This page is about a different car, the 2009 Mercedes-Benz CLK350 and 2008 Mercedes-Benz CLK350. However, it is still accessible from the selected car via links, so may be relevant.

MODEL 209 

Illustrated on model 219 

Fig 1: Removing/Installing 12 Volt Socket
G07718277Courtesy of MERCEDES-BENZ USA
REMOVINGINSTALLING Remove/install     
1 Switch off ignition    
2 Open flap (1) of vehicle interior socket (X58/1)    
3 Unlock vehicle interior socket (X58/1) using pliers (2) and pull out until the electrical connector (3) is accessible IMPORTANT The trunnion of the pliers (2) must engage in the cutouts of the housing of the vehicle interior socket (X58/1) (arrows).  
SPECIAL TOOL Fig 2
4 Disconnect electrical connector (3) and remove vehicle interior socket (X58/1) IMPORTANTInstallation:  Pay attention to correct installation position of vehicle interior socket (X58/1).  
5 Install in the reverse order    
Fig 2: Identifying Pliers (169 589 00 37 00)
G07718278Courtesy of MERCEDES-BENZ USA