LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2006 >> CLK55 >> Repair and Diagnosis >> Collision >> General Collision Information >> Side Wall -- Testing & Repair -- 209 Chassis - 1 Of 3 >> Testing & Repair >> Replace complete rear fender - AR63.50-P-1400 >> Completely replace rear fender - AR63.50-P-1400Q >> Preparing new rear fender - AR63.50-P-1400-03Q

Preparing new rear fender - AR63.50-P-1400-03Q

COMMERCIALLY AVAILABLE TOOLS

Number Designation
WH58.30-Z-1001-03A Round wire brush, braided, dia. 70 mm
WORKSHOP EQUIPMENT

WE58.40-Z-1001-03A Drill (electric/pneumatic)
REPAIR MATERIALS

Number Designation Order number
BR00.45-Z-1001-07A Zinc dust paint suitable for spot welding A 000 986 34 42
Fig 1: Identifying Grinding Area
G04959160Courtesy of MERCEDES-BENZ USA
  1. Then grind connection surfaces to bare metal in checked areas. Sand spot weld flanges to bare metal on both sides
  2. Coat insides of spot weld flanges with zinc dust paint.
    Fig 2: Identifying Welding Area
    G04959161Courtesy of MERCEDES-BENZ USA
scientia non olet · About LEMON Manuals