Remove/install pedal assembly for parking brake - AR42.20-P-0510P
MODELS 203, 209
Shown on pedal assembly, model 203
MODIFICATION NOTES
| 11.12.02 | Check version of pedal assembly, added | Step 11 | BT42.20-P-0510-01A |
| Remove/install | |||
| 1.1 | Remove rear seat cushion | Vehicles without code P98 Black Series | |
| Model 209.3 with through-loading facility, code 287a | AR91.12-P-1020P | ||
| Model 209.4 | AR91.12-P-1020QA | ||
| 1.2 | Remove battery | Vehicles with code P98 Black Series | AR54.10-P-0005P |
| 2.1 | Remove cover panel below rear seat cushion | Vehicles without code P98 Black Series | |
| 2.2 | Remove cover panel under battery | Vehicles with code P98 Black Series | |
| 3 | Loosen adjusting nut (89) on cable slack adjuster | ||
| 4 | Remove cover below instrument panel | AR68.10-P-1500P | |
| 5 | Remove cover (71a) of pedal assembly (71) | ||
| 6 | Unhook brake cable (85) from tensioning shackle on parking brake pedal (75) | Fig 2 | |
| 7 | Detach pedal assembly (71) | *BA42.20-P-1001-01A | |
| 8 | Detach plug from parking brake indicator switch (S12) | ||
| 9 | Unhook release cable (79) from pedal assembly (71) | ||
| Tool for parking brake cable release | WF58.50-P-4220-01A | ||
| 10 | Remove foot controls (71) | ||
| 11 | Install in the reverse order | ||
| Check | |||
| 12 | Check version of pedal assembly (71) | ||
| Parking brake pedal assembly (71) modified | BT42.20-P-0510-01A | ||
| 13 | Adjust parking brake | AR42.20-P-0540A | |
PARKING BRAKE
| Number | Designation | Model 203 | Model 209 | |
|---|---|---|---|---|
| BA42.20-P-1001-01A | Bolt, foot-operated parking brake pedal assembly at front wall pillar | Nm | 12 | 12 |