Remove/install electronic stability program (ESP) control unit - AR42.45-P-0820P
MODEL 203, 209
Shown on model 203
| Remove/install | |||
| 1 | Switch off ignition | ||
| 2 | Remove air pump | Vehicles with code P98 Black Series | AR14.30-P-7251QBS |
| 3 | Release and detach coupling (42) on control unit (N47-5) | ||
| 4 | Detach heat shield from hydraulic unit (A7/3) | With engine 156 | |
| 5 | Remove bolts (32) from control unit (N47-5) | *BA42.45-P-1005-01B | |
| 6 | Detach and remove control unit (N47-5) to the front away from the hydraulic unit (A7/3) | ||
| 7 | Install in the reverse order |
ELECTRONIC STABILITY PROGRAM (ESP)
| Number | Designation | Model 209 | |
|---|---|---|---|
| BA42.45-P-1005-01B | Nut, control unit to ESP hydraulic unit | Nm | 4 |