Remove/install front floor covering (left) - AR68.20-P-2050P

MODEL 203, 209 

Shown in model 203.0 

Fig 1: Identifying Front Floor Covering Components (Left)

Courtesy of MERCEDES-BENZ USA

	Remove/Install
1	Move left front seat all the way back
2	Unclip door sill molding (1), remove
3	Remove edge guard (2) in area of A-pillar cover (4)
4	Unclip cap from A-pillar cover (4)
5	Unscrew bolt (3)
6	Unclip cap from A-pillar cover (4), remove
7	Unclip cap from accelerator pedal (5)
8	Unscrew nut (6) and lay accelerator pedal (5) in connected condition to the side
9	Lift floor covering (7) at rear, take out	Installation:  Insert floor covering in area of center console.
10	Install in the reverse order