Remove/install windshield washer hose - AR82.35-P-6980QBS (Black Series)

MODEL 209 with CODE (P98) Black Series 

Fig 1: Removing/Installing Windshield Washer Hose - Black Series

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

	Remove/install
1	Open engine hood		AR88.40-P-1000Q
2	Remove air filter housing (3)
3	Detach washer fluid hose (2) and seal	Carefully detach washer fluid hose (2) in order to avoid any damage. Collect any escaping window washer fluid in a suitable container.
			Fig 2
4	Remove air intake grille on engine hood		AR88.40-P-3001Q
5	Press T-piece (4) out of left windshield washer nozzle (7)	Carefully press out T-piece (4) from left windshield washer nozzle (7) to avoid any damage.
6	Push angle piece (6) out of right windshield washer nozzle (5)	Carefully push out angle piece (6) from right windshield washer nozzle (5) to avoid any damage.
7	Expose washer fluid hose (2) and remove
8	Install in the reverse order
9	Carry out function check
10	Check windshield washer system fluid level and correct if necessary
	Check windshield washer system fluid level and correct if necessary		AP82.35-P-8210P

Fig 2: Identifying Set Of Stop Plugs (129 589 00 91 00)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.