Calling stored exterior rearview mirror position, function - GF88.79-P-2005S

MODEL 220 with CODE (275a) Memory package (driver's seat, steering column, mirrors) 

MODEL 215, 220 (except, 220.063) 

Function prerequisites 

• Voltage not too low or too high
• 15R or c.15 ON
• Driver's door open
• None of the buttons for manual seat, rearview mirror or steering column adjustment are actuated.

Function 

The stored positions for the left electrically adjustable and heated exterior rearview mirror (M21/1)  and right electrically adjustable and heated exterior rearview mirror (M21/2)  can be called by pressing the memory position 1 switch (N69/1s6)  or memory position 2 switch (N69/1s7)  in the left front door control module (N69/1)  . (On vehicles with right-hand steering the stored positions can be called by pressing the corresponding switches on the right front door control module (N69/2)).

As long as the button is pressed the motors in the left electrically adjustable and heated exterior rearview mirror (M21/1) and right electrically adjustable and heated exterior rearview mirror (M21/2)  are actuated by the left front door control module (N69/1)/ right front door control module (N69/2)  until the position measurement  feature recognizes that the stored position has been reached.

Memory function 

The steering column, driver's seat and interior rearview mirror also move to the associated, stored positions when the stored exterior rearview positions are called.