Inputting software update for TV tuner - AN82.60-P-0001-02B

Models 215, 220 

1. Switch off ignition and withdraw ignition key.
2. Switch on operating unit with ON touch switch and wait about 10 s until operating unit is correctly switched off.
3. Press keys * and # at the same time and hold and switch on unit with ON switch. Wait until download screen is displayed, then release keys.
4. Insert download CD. (In the case of CD version with automatic CD eject, CD is ejected and must be inserted once again  ).
5. Press the following keys to override an older or same version:

   First of all RET  alone, then 23  and 9  at the same time.

6. For download with ICAN activity (if ICAN active, download stops endlessly in the case of checking CD) press keys 1  and 3  at the same time (before start of download!)
7. Start download by selecting with start operating unit  rotary knob and press on rotary knob.
8. The download now runs automatically in two stages and takes about 45 minutes in total.
9. Confirm final message with OK  , remove download CD and insert NAVI map CD, switch unit off and on with ON switch.

Procedure in the case of download problems 

If the download does not continue running or takes significantly more than 45 minutes:

Remove fuse F61 (for radio/sound/COMAND operating unit and navigation) and insert again. This fuse is located in the right below the rear seat bench in the footwell (fuse and relay box below right rear seat). The fuse box is enclosed with a black rectangular plastic cover and can easily be opened without a tool. A drawing of the fuse assignment is provided at the vehicle tool kit in the trunk above the spare wheel. F61 is the 5th, counting from the middle of the vehicle, and the 14th, counting from the door (long row of fuses with a total of 18 fuse positions, not all of which are fitted).

After this, once again start the download process.