Replace supporting joint - AR33.20-P-0440MB

MODEL 220 with CODE (979) Special protection version with CODE (Z07) Top protection 

Fig 1: Identifying Steering Knuckle And Support Joint

	Remove/Install
	Risk of death  caused by vehicle slipping or toppling off of the lifting platform.	Align vehicle between the columns of the lifting platform and position the four support plates at the lifting platform support points specified by the vehicle manufacturer.	AS00.00-Z-0010-01A
	Notes on self-locking nuts and bolts		AH00.00-N-0001-01A
	When carrying out service and repair operations on the front-end assembly, always take great care to prevent leaving scratches, notches or fissures in the aluminum components. Otherwise the service life of the parts will be affected
Installation	Tighten nuts and bolts of chassis components only in curb condition.
1	Remove steering knuckle (5)		AR33.25-P-0400MB
2	Press supporting joint (7) out of steering knuckle (5)		AR33.20-P-0440-01I
		Extraction and insertion tool	Figure
		Press	Figure
		Pressure screw	Figure
3	Install in the reverse order

Fig 2: Identifying Removal And Installation Tool (220 589 03 43 00)

Fig 3: Identifying Press (202 589 04 43 10)

Fig 4: Identifying Thrust Bolt (202 589 04 43 11)