Removing and installing pressure supply reservoir for multicontour backrest - AR91.25-P-1650N
MODEL 215 with CODE (404a) Left multicontour seat with CODE (405a) Right multicontour seat
Fig 1: Identifying Pressure Supply Reservoir For Multicontour Backrest Remove/Install Components - Model 215
| Removing, installing | |||
| 1 | Remove rear seat backrest | AR91.12-P-1620M | |
| 2 | Remove rear shelf | AR68.30-P-4580M | |
| 3 | Press pneumatic line (2) off of pressure supply reservoir (1) | ||
| 4 | Remove pressure supply reservoir (1) | ||
| Remove pneumatic lines | AR91.25-P-1560-01N | ||
| 5 | Install in the reverse order | ||
| 6 | Check pressure supply reservoir (1) for leakage |