Removing and installing left center vent diverter flap actuator motor - AR83.30-P-2070M
MODEL 215, 220
REVISIONS
| 14.10.98 | Synchronization of actuator motors | Step 6, newly included |
| Removal, installation | |||
| 1 | Remove cover below instrument panel on left | Model 215 | AR68.10-P-1500N |
| Model 220 | AR68.10-P-1500M | ||
| 2 | Disconnect actuator motor connector (3) | ||
| 3 | Unscrew screws (2) | ||
| 4 | Pull off actuator for left center vent diverter flap actuator motor (M16/17) | ||
| 5 | Install in opposite order | ||
| 6 | Perform synchronization of actuator motors | Actuation, synchronization of actuator motors |