Remove/install oil pan - AR01.45-P-7500R

ENGINE 113.963 in MODEL 230.475 

ENGINE 113.992 in MODEL 230.474 

ENGINE 113.991 in MODELS 215.374, 220.074 /174 

ENGINE 113.995 in MODEL 230.472 

Fig 1: Identifying Oil Pan Remove/Install Components - Engines 113.963, 113.992, 113.991, 113.995

	Remove/install
	Risk of death  caused by vehicle slipping or toppling off the lifting platform.	Align vehicle between columns of the lifting platform and position four support plates at the lifting platform support points specified by the vehicle manufacturer.	AS00.00-Z-0010-01A
1	Remove oil pan bottom section (1)		AR01.45-P-7555R
2	Remove oil pan top section(2)	Installation:  Observe different lengths of screws and diameters of screws:
		Screw diagram of oil pan	AR01.45-P-7500-06F
			*BA01.45-P-1001-01B
		Installation:  Clean sealing surfaces, apply sealant to sealing surfaces in the form of a bead with a height and width of 2.0 mm ± 0.5 mm! The sealant must be applied within 10 minutes! The silicone bead must not be spread!	*BR00.45-Z-1013-01A
	Application of sealant to oil pan		AH01.45-P-0001-01R
3	Install in the reverse order
	Risk of accident  caused by vehicle starting off by itself when engine is running. Risk of injury  caused by contusions and burns during starting procedure or when working near a running engine	Secure vehicle to prevent it from moving by itself. Wear closed and snug-fitting work clothes. Do not grasp hot or rotating parts.	AS00.00-Z-0005-01A
4	Run engine and inspect for leaks

OIL PAN