Automatic opening/closing of sliding/pop-up roof, function - GF77.20-P-2008S

MODEL 215.3 

MODEL 220.0 /1 with CODE (414a) Electric glass sliding/pop-up roof 

MODEL 220.0 /1 with CODE (491) USA version 

MODEL 220.075 /175 with CODE (498) Japanese version 

Automatic function 

The automatic function is activated by briefly pressing the SR switch (N70s1) in the overhead control panel control unit (N70) beyond the pressure point in the "Open pop-up roof" or "Open sliding roof" direction.

The sliding/pop-up roof moves to the last stored roof position (last memory).

Storage is only accomplished when the sliding/pop-up roof (SR) (M12) was in the non-actuated position for t > 2 s after previous actuation.

The automatic function is interrupted by pressing the SR switch (N70s1) again (in any direction).