Remove/install gasket on outside mirror - AR88.70-P-9090M

MODEL 215, 220 

Fig 1: Identifying Outside Mirror Gasket Remove/Install Components

	Remove
1	Completely remove left electrically adjustable and heated outside mirror (M21/1) or right electrically adjustable and heated outside mirror (M21/2)	Model 215	AR88.70-P-9000N
		Model 220	AR88.70-P-9000M
2	Remove vapor barrier (3)	Note correct installation positions.
3	Lay new gasket (2) over old gasket (1) of left electrically adjustable and heated outside mirror (M21/1) or right electrically adjustable and heated outside mirror (M21/2)
4	Mark cutout (A) for new gasket (2) on old gasket (1)
5	Remove new gasket (2)
6	Increase cutout transferred to old gasket (1) by dimension X and mark cutting line (B)	Dimension X should be min. 5 mm.
7	Cut off gasket (1) off along cutting line (B) and remove outer part from old gasket (1)
8	Cut elevations off of remaining piece (4) remaining on left electrically adjustable and heated outside mirror (M21/1) or right electrically adjustable and heated outside mirror (M21/2) on old gasket (1)	The remaining piece (4) should not have elevations, otherwise the remaining piece (4) and new gasket (2) will not seal properly with one another.
	Install
9	Install new gasket (2) on left electrically adjustable and heated outside mirror (M21/1) or right electrically adjustable and heated outside mirror (M21/2)
10	Insert vapor barrier (3)
11	Completely install left electrically adjustable and heated outside mirror (M21/1) or right electrically adjustable and heated outside mirror (M21/2)	Model 215	AR88.70-P-9000N
		Model 220	AR88.70-P-9000M