Removing tapered roller bearing outer races from rear axle housing - AR35.31-P-0550-02A

Fig 1: Identifying Spring Compressor (116 589 18 61 00)

1. Insert assembly arbor (046) for differential pinions on right-hand side and press complete differential to the left until it touches the rear axle housing.
   Fig 2: Inserting Assembly Arbor For Differential Pinions

   
2. Remove left and right tapered roller bearing outer race (11a).

   Mark tapered roller bearing outer races.

   Fig 3: Identifying Left And Right Tapered Roller Bearing Outer Race