Remove/install rear seat cushion - AR91.12-P-1020P
MODELS 203.2 /7 /0, 209.3 with CODE (287a) Through-loading feature
Shown in model 203.0 with code (287a) through-loading feature
Fig 1: Identifying Rear Seat Cushion Components - Shown In Model 203.0 With Code (287A) Through-Loading Feature
| Remove/install | |||
|---|---|---|---|
| 1.1 | Pull locking lug (6) and fold rear seat cushions (1, 2) forwards | With code (287a) through-loading feature | |
| 2.1 | Unscrew nuts of support belt on rear seat cushion (5) on vehicle floor | With code (287a) through-loading feature | |
| *BA91.12-P-1005-03C | |||
| 3.1 | Fold down 2/3 rear seat cushion (1), 1/3 rear seat cushion (2) | With code (287a) through-loading feature | |
| 4 | Unclip protective caps | ||
| 5 | Unscrew hinge nuts of rear seat cushion (3) on vehicle floor | ||
| *BA91.12-P-1004-03C | |||
| 6 | Remove 2/3 rear seat cushion (1), 1/3 rear seat cushion (2) | ||
| 7 | Install in the reverse order | ||
| 8 | Check for proper function |
| Number | Designation | Model 203 | Model 209 | |
|---|---|---|---|---|
| BA91.12-P-1004-03C | Rear seat cushion hinge nut to floor of vehicle | NM | 20 | 20 |
| BA91.12-P-1005-03C | Rear seat cushion support belt nut to floor of vehicle | NM | 20 | 20 |