Install and weld in rear end assembly - AR64.20-P-1020-03P

TEST VALUES FOR GAP DIMENSIONS ON HOODS, DOORS AND LIDS

Number	Designation				Model 203.004/006/007/008/016/018/020/035/040/042/043/045/046/052/056/061/064/065/0881/084/087
BE60.00-P-1003-01E	Gap dimension	Trunk lid to rear fender, top	Dimension "F"	mm	3.5 (± 1)
		Trunk lid to taillamp	Dimension "M"	mm	4 (± 1)
		Rear fender to taillamp	Dimension "U"	mm	-
			See picture		AR60.00-P-0700-01P

Fig 1: Identifying Feeler Gauge (129 589 03 21 00)

REPAIR MATERIALS

Number	Designation	Order number
BR00.45-Z-1003-01A	Sealant	A 001 989 63 20
BR00.45-Z-1001-07A	Zinc dust paint suitable for spot welding	A 000 986 34 42

1. Fit rear end with aid of rear lamps, and fasten to connecting points using clamping pliers.
   Fig 2: Identifying Rear End Dimension

   
   Fig 3: Identifying Rear End Assembly

   
2. Rear end assembly .