Automatic opening/closing of sliding/pop-up roof, function - GF77.20-P-2008PP

MODEL 203.0 /2 with CODE (414a) Electric glass sliding/pop-up roof 

Function 

The automatic function is deployed by briefly moving the roof system switch (N70s1) in the overhead control panel control module (N70) beyond the actuation point in the "Open pop-up roof" or "Open sliding roof" direction.

The sliding/pop-up roof moves to the last stored roof position (last memory). Storage is always accomplished, when the sliding/pop-up roof has been in the non-actuated state for a time of t > 2 s after the previous actuation.

It is closed in the same way.

The automatic function is interrupted by actuating the roof system switch (N70s1) again (in any direction).