LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2006 >> C55 >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Entertainment/Navigation, Lighting, Windows -- 203 Chassis >> Basic Knowledge >> Radio mode, function - GF82.60-P-2001PMU

Radio mode, function - GF82.60-P-2001PMU

Model 203.0 /2 /7 as of 24.4.04 with CODE (528) HIGH Class USA 

Model 203.0 /2 /7 as of 24.4.04 with CODE (530) COMAND APS USA (with navigation system) 

Radio reception, function 

After the radio menu has been activated by operating the "FM/AM" button on the COMAND operating, display and control unit (A40/3), the antennas in the rear window receive frequency-modulated (FM) and amplitude-modulated (AM) high frequency (HF) signals. The music, speech and data signals are modulated upon these high-frequency signals. The amplifier module 2, window antenna (A2/72) and the amplifier module 3, window antenna (A2/73) filter the frequencies of the radio frequency bands out of the high-frequency signals received and amplify them. The amplified high-frequency signals are then transferred via a shared coaxial line (FM, AM) to the radio receiver (is integrated into the control). The radio receiver demodulates the high frequency signals, in other words it separates the useful information (audible frequencies) from the carrier signal (inaudible).

The demodulated audio signals are amplified and converted to sound signals by the vehicle speakers.

The radio system also offers the option of receiving regional supplemental information via the weather band (WB) channel (e.g. weather forecasts, weather warnings, warnings of other dangers).

FM antenna diversity, function 

In the case of the "antenna diversity" function, reception-dependent switching over is carried out between the FM antennas of the rear window. The function runs automatically and is executed by the amplifier module 2, window antenna (A2/72) and the amplifier module 3, window antenna (A2/73).

The radio receiver in the COMAND operating, display and control unit (A40/3) only generates the intermediate frequency (ZF) signal, which serves the amplifier module 2, window antenna (A2/72) and the amplifier module 3, window antenna (A2/73) as a reference for switching the FM antenna.

Station selection options:

  Rear window antenna, location/task/design/function Model 203.0/7 GF82.62-P-3106PP
    Model 203.2 GF82.62-P-3106PS
  Radio satellite antenna, location/task Models 203.0/2 up to 31.5.05 GF82.62-P-4109PMU
    as of 1.6.06
Models 203.0/2 with code (536) SIRIUS satellite radio
GF82.62-P-4109PO
  Sound amplifier, location/purpose/design/function With code (810) Sound system except Models 203.076/276 GF82.62-P-3100PMU
    Models 203.076/276 GF82.62-P-3100PMV
  Satellite radio, location/task Models 203.0/2 up to 31.5.05 GF82.85-P-3113PMU
    Model 203.7  
    as of 1.6.06 GF82.85-P-3113PO
    Models 203.0/2 with code (536) SIRIUS satellite radio