Remove/install lock cylinder in catch for armrest on middle console - AR68.20-P-2390P

MODEL 203, 209 

with CODE (326) Telephone holder in front armrest 

with CODE (386) Preinstallation for "portable CTEL", UPCI telephone system 

MODEL 209 with CODE (494) USA version 

Fig 1: Identifying Lock Cylinder In Catch For Armrest On Middle Console Remove/Install Components

	Remove
1	Remove catch on armrest cover from center console		AR68.20-P-2380P
2	Press shaft (3) out of lock housing (1) with suitable tool and remove button housing (2)	Press out shaft (3) in direction of arrow.
3	Insert key (5) into lock cylinder (4)
4	Break off catch lug (6) with suitable tool	3 catch lugs (6) are located around the lock cylinder (4)
5	Remove lock cylinder (4) with key (5) from button housing (2)
	Install
6	Insert lock cylinder (4) with key (5) into new lock housing (1) and allow to catch	Note direction of installation.
7	Install armrest cover lock on center console		AR68.20-P-2380P