Convenience closing function - GF68.50-P-2001PC

MODEL 203.7 with CODE (413) panoramic sliding roof 

Fig 1: Convenience Closing Function, Networking Of Components - Model 203.7 With Code (413)

Function requirements 

• No overvoltage/undervoltage
• All doors closed (state: locked) and
• Ignition key in "0" position or removed
• "Lock" button on transmitter key (A8/1)  pressed and held a Panoramic sliding roof closed

Function 

The transmitter key (A8/1)  sends an infrared signal to the left front IR receiver (A26/1)  or the right front IR receiver (A26/2)  . The overhead control panel control module (N70)  receives the request for convenience closing via CAN  and actuates the sun blind motor (M24m1)  in the "close sun blind" direction.

The motor remains actuated for as long as the "Lock" button on the transmitter key (A8/1)  is pressed.

The convenience closing  function for the sun blind is aborted if 

• The request is no longer received via CAN  , or
• The function requirements listed above are no longer satisfied.

The convenience closing  function also closes the windows.