LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2006 >> C350 Base, Standard >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Rear Axle -- Testing & Repair -- 203 Chassis - 1 Of 2 >> Testing & Repair >> Remove/install rear rubber mount in rear axle mount - AR35.10-P-0040-03P

Remove/install rear rubber mount in rear axle mount - AR35.10-P-0040-03P

Fig 1: Identifying Extractor And Insertion Tool (203 589 00 43 00)
G04734627
REPAIR MATERIALS

Number Designation Order number
BR00.45-Z-1002-06A Lubricant A 000 989 01 60

    Remove 

  1. Press rubber mount (1b) out of rear axle carrier using puller tool SPECIAL TOOL (01a-01c).
    Fig 2: Identifying Rubber Mount And Puller Tool
    G04734628

    2. Install 

  2. Grease rubber mount (1b) with lubricant.
  3. Pull in rubber mount (1b) using installation tool SPECIAL TOOL (01c, 01f, 01g).

    IMPORTANT Position lower part of installation tool SPECIAL TOOL (01g) on rubber mount (1b) such that the lugs are not damaged when the rubber mount is installed.

    Fig 3: Identifying Rubber Mount And Installation Tool
    G04734629
scientia non olet · About LEMON Manuals