LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2006 >> C350 Base, Standard >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Rear Axle -- Testing & Repair -- 203 Chassis - 1 Of 2 >> Testing & Repair >> Remove/install front rubber mount in rear axle mount - AR35.10-P-0040-02P

Remove/install front rubber mount in rear axle mount - AR35.10-P-0040-02P

Fig 1: Identifying Extractor And Insertion Tool (203 589 00 43 00)
G04734624
REPAIR MATERIALS

Number Designation Order number
BR00.45-Z-1002-06A Lubricant A 000 989 01 60

    Remove 

  1. Press rubber mount (1a) out of rear axle carrier using extraction tool SPECIAL TOOL (01c, 01d, 01e).

    IMPORTANT Before inserting the bracket (01e), lower the rear axle a little if necessary or press down the rear axle carrier a little using a suitable tool.

    IMPORTANT If the Glycol oil is still in the rubber mount, cover the rubber mount using a suitable rag. The inner core may separate from the rubber mount.

    Fig 2: Identifying Rubber Mount, Extraction Tool And Bracket
    G04734625

    2. Install 

  2. Rub anti-friction fluid (1a) around edge of rubber mount.
  3. Pull in rubber mount (1b) using installation tool SPECIAL TOOL (01c, 01h, 01i).
    Fig 3: Pulling In Rubber Mount Using Installation Tool
    G04734626
scientia non olet · About LEMON Manuals