Converting rear bumper - AZ88.00-P-0001-03L

Preparation 

1. Remove bumper
2. Remove cross member (1) and inner section (2).
3. Remove impact damper (3).
4. Remove side mounts (4).
5. Remove upper rails (5).
6. Remove Parktronic wiring harness (6).
7. Remove molding strips (7).
8. Remove towing bracket cover (8).
9. Remove insulation (9).
   Fig 1: Converting Rear Bumper Components - Preparation

   

Assembly 

10. Cut impact damper (3), see marked area (arrow).
11. Reassemble and reinstall bumper in opposite order.
    Fig 2: Converting Rear Bumper Components - Assembly