Check and correct headlamp adjustment - AP82.10-P-8260P

MODEL 203, 209 

MODIFICATION NOTES

25.6.03

Safety instructions regarding risk of death due to high voltage at Xenon headlamps, newly included

	Check
	Risk of death  caused by high voltage levels present at xenon headlamps. Risk of explosion/fire hazard  through highly flammable material in the area of damaged xenon lamps Risk of injury  through UV light, hot components on xenon headlamps and glass splinters when xenon bulbs burst Risk of poisoning  through inhalation of mercury vapor and swallowing of or skin contact with toxic salts and mercury compounds	Do not come into contact with parts that are under high voltage. Persons with active electronic implants  (e.g. heart pacemakers) must never work on xenon headlamps. Switch off complete lighting system. Wear insulating safety shoes, safety glasses and protective gloves. Remove highly inflammable materials from the hazard area. Ensure that the workplace is sufficiently ventilated.	AS82.10-Z-0001-01A
	Risk of accident  caused by vehicle starting off by itself when engine is running. Risk of injury  caused by contusions and burns during starting procedure or when working near the engine as it is running	Secure vehicle to prevent it from moving by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.	AS00.00-Z-0005-01A
1	Park vehicle on a level surface.	Vehicle must be in curb condition (curb weight, fuel tank full or corresponding additional weight).
2	Correct tire inflation pressure
3.1	Have person sit on driver seat or place load of 75 kg on seat.	Except
4	Align headlamp adjustment testing unit to the vehicle and carry out height setting according to middle of the lens.	Observe operating instructions for headlamp adjustment testing unit.
			*WE58.40-Z-1006-19A
5	Start the engine and switch on low beam
6.1	Check function of headlamp range adjustment by adjusting headlamp range adjustment switch	Except bi-xenon headlamp unit CODE (614) or Both light beams of the headlamps must be evenly adjusted.
6.2	Check function of headlamp range adjustment through placement of additional weights in the luggage compartment	With bi-xenon headlamp unit CODE (614) or When loading and unloading, the light-dark boundary must be able to be set to its previously determined position.
7.1	Set switch for headlamp range adjustment to position 0	Except bi-xenon headlamp unit CODE (614) or
7.2	Remove additional weights from the luggage compartment	With bi-xenon headlamp unit CODE (614) or
8	Check low beam, if required correct setting	With bi-xenon headlamps CODE (614) or : correct setting against a separate order.	AP82.10-P-8260-01A
9	Check setting of high beam	With bi-xenon headlamps CODE (614) or : correct setting against a separate order.	AP82.10-P-8260-02A
10	Check fog lamp, if required correct setting		AP82.10-P-8260-04A
11	Turn off engine

WORKSHOP EQUIPMENT

WE58.40-Z-1006-19A

Headlamp adjustment testing unit